VEGA VEGAPULS 63 Betriebsanleitung Seite 57

Diagramm Abgleich
Die folgende Abbildung zeigt die Funktion des Abgleichs.
Abb. 35: Abgleich VEGAPULS 63
Parameterliste
Die folgende Liste enthält die wichtigsten Parameter und ihre Bedeutung:
primary_value
l
Process value after min/max-adjustment and linearization. Selected as input to AIFB by setting
-
'Channel' = 1. Unit derives from 'Primary_value_unit'
primary_value_unit
l
Selected unit code for "primary_value"
-
secondary_value_1
l
Value after min/max-adjustment (level + level offset). Selected as input to AIFB by setting
-
'Channel' = 2. Unit derives from 'Secondary_value_1_unit'
secondary_value_1_unit
l
Selected unit code for "secondary_value_1"
-
secondary_value_2
l
Sensor value + sensor offset. Selected as input to AIFB by setting 'Channel' = 3. Unit derives
-
from 'Secondary_value_2_unit'
secondary_value_2_unit
l
Unit code of 'Secondary_value_2'
-
sensor_value
l
Raw sensor value, i.e. the uncalibrated measurement value from the sensor. Unit derives from
-
'Sensor_range.unit'
sensor_range
l
'Sensor_range.unit' refers to 'Sensor_value', 'Max/Min_peak_sensor_value', 'Cal_point_hi/lo'
-
simulate_primary_value
l
simulate_secondary_value_1
l
simulate_secondary_value_2
l
device_status
l
VEGAPULS 63 • Foundation Fieldbus
Secondary_value_1
cal_level_hi
cal_level_lo
Calibration
Lowest Point
cal_level_hi [%]
cal_level_lo [%]
Calibration Sensor_value
Highest Point
Sensor reference plane
Calibration
Highest Point
Calibration
Lowest Point
10 Anhang
57