Replacing The Fuse; Technical Specifications - EuroLite Audience Blinder 2x50W LED COB 3200K Bedienungsanleitung

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lenses will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly.
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Audience Blinder
Power supply:
Power consumption:
Number of DMX channels:
DMX512 connection:
Flash-rate:
Number of LEDs:
LED type:
Color temperature:
Beam angle:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Please note: Every information is subject to change without prior notice. 15.01.2014 ©
CAUTION!
2x50W LED
COB 3200K
230 V AC, 50 Hz ~
120 W/205 VA
1/2/4
5-pin and 3-pin XLR
20 Hz
2
Array 50 W, white
3200 K
60°
140 x 420 x 240 mm
4 kg
: 45° C
a
: 65° C
C
0.50 m
0.20 m
F 2 A, 250 V
24/24
2x100W LED
COB 3200K
230 V AC, 50 Hz ~
260 W/270 VA
1/2/4
5-pin and 3-pin XLR
20 Hz
2
Array 100 W, white
3200 K
60°
140 x 420 x 240 mm
4 kg
45° C
75° C
0.50 m
0.30 m
F 3 A, 250 V
00068940.DOC, Version 1.1