Setting Up; Unpacking; Installing The Batteries; Connecting An Antenna - Medion MD 30016 Bedienungsanleitung

Setting Up

Note
Read the Safety Information Chapter from Page 1 ff under all circumstances before bringing the device into
operation.

Unpacking

•
Please keep the packaging material well and use it exclusively to transport the television.

Installing the batteries

1. Open the battery compartment of the remote.
2. Install two AAA size, type R03 batteries according to the correct polarity (marked in
the battery compartment).
3. Close the battery compartment.
Attention!
Remove the batteries from the remote, if the device will not be used for a longer period. The remote could be
damaged by leaking batteries.

Connecting an antenna

•
Connect the aerial socket and the television device to the RF IN connection with a doubly screened aerial cable (not in
the scope of the delivery) for the connection to the external aerial or the cable plant.

Connecting the power supply

1. Connect the plug of the mains (power supply) supplied with the device to the electrical terminal on the device.
2. Connect the mains connection cable supplied with the device to a well accessible 230 V ~ 50 Hz mains socket. The de-
vice will go into the standby mode and the display on the front will shine red.
12 E E
N N G G L L I I S S H H