Connecting The Vs-2 Plus With A Computer; Description; Installation; Connecting The Local Monitor - Guntermann & Drunck Video-Splitter 2plus Installationsanleitung

Guntermann & Drunck GmbH
1

Description

The Video-Splitter 2
signals. The Video-Splitter 2
larger distances as well as the distribution of video signals on two monitor.Via
cascading, the Video-Splitter 2
monitors.

Installation:

2
2.1 Connecting the VS-2
Disconnect the VGA-cable from the VGA port of your computer
Plug the VGA-2 Kabel on the VGA port of your computer
Plug the VGA-2 Kabel in the port VGAin

2.2 Connecting the local monitor

Connect the cable of your monitor with the port Monitor local
plus
2 . Here the DDC information of the connected monitor will be asked.
plus
is an activ interface – multiplier for analog video
plus
allows the transmission of video signals over
plus
Power +9V DC
250mA
Active
Remote
tuning
VGA in
ideo plitter
Operation Instructions Video-Splitter 2
plus
(VS-2 ) can operate a larger amount of
Monitor remote
Monitor local
plus
plus
with a computer
page 4
plus
of the VS-2
of the VS-
plus