Configuration Of The Receiver; Basic Settings; Factory Defaults - Medion MSH 3002 Handbuch

Configuration of the receiver

Basic settings

The basic settings are modified in the sub menu "Edit Settings" of the main menu, which
can be reached by pressing the MENU button twice.
To change an individual option of the settings menus use the – / + buttons. As long as
these options stem from a values list, this list can be opened by pressing the OK button.
Numerical values can be entered directly using the numeric buttons.
Settings, which have been changed without saving, are marked green. When the receiver is
used for the first time and no settings have been made, all values will appear green.
Changes to settings must be saved. Go to the heading "Save settings" in the settings
menu and press OK. Wait until the menu has disappeared, only then are the changes
saved in the non-volatile memory, this may take a few seconds.
All individual options are clearly explained in the online help. Please read the chapter
"Installation" carefully to change the important settings.

Factory defaults

The function "Factory Defaults" in the "Edit Settings" menu resets all settings to the values
that are set before the receiver leaves the factory.
The Factory defaults will be saved immediately. The channel list is not affected by this
function.
MSH 3002 49