Troubleshooting; Technical Information - Reloop RMP-2 MK2 Bedienungsanleitung

TROUBLESHOOTING

If your Reloop RMP-2 MK2 s is experiencing any difficulties please check the
following table for malfunction symptoms and take the corrective measures
proposed in the table.
Symptoms
No power when
activating the power
ON/OFF switch.
The CD replay does not
start.
No sound.
CD skips.
Humming sound.

TECHNICAL INFORMATION

Global Distribution GmbH did not check the following manufacturer's data for
plausibility and accuracy:
Frequency response:
Channel separation:
S/N ratio:
D/A converter:
MP3 Formats:
Maximum MP3 folders:
Maximum MP3 files:
Dimensions:
Weight:
36
Possible cause
Poor mains plug
connection.
The CD is upside in the
tray down or is soiled.
Output cable is wrong
or not correctly
connected, wrong
amplifier or mixing
console operation.
The CD player is
continuously exposed to
vibrations and shocks
for longer than 30
seconds.
Loose cable
connections.
20 Hz - 20 kHz
81 dB
90 dB
8-fold/1 Bit
MPEG 1 Layer 3 standard
MPEG 2 Layer 3 standard
MPEG 2.5 Layer 3 standard
255
999
320 x 112.6 x 340 mm
4.4 kg
Remedy
Check mains plug
connection
Place CD in tray with
label facing up; clean
CD.
Check connections of
output cables and
settings on amplifier or
mixing console.
Install the equipment at
another location.
Check sound plugs.