Safety Instructions - Reloop RMP-2 MK2 Bedienungsanleitung

OPERATION MANUAL
ENGLISH
Congratulations on purchasing your Reloop RMP-2 MK2 MP3-CD player.
Thank you for placing your trust in our disc jockey technology. Before
operating this equipment we ask you to carefully study and observe all
instructions.
Please remove the RMP-2 MK2 from its packaging. Check before initial operation
to make sure that the device did not suffer any visible damage during transport.
If you detect any damage to the power cable or the casing, do not operate the
device. Contact your specialised dealer.

SAFETY INSTRUCTIONS

CAUTION! Please exercise particular caution when handling 230 V power
voltage. This voltage rating may lead to a critical electrical shock! Any
damage caused by the non-observance of this operation manual excludes
any implied warranty claims. The manufacturer is not liable for any damage
to property or for personal injury caused by improper handling or non-
observance of the safety instructions.
-
-
-
-
-
-
-
-
-
-
-
-
-
20
This device left the works in a perfect condition. To maintain this condition
and to ensure a risk-free operation the user must observe the safety
instructions and warnings contained in this operation manual.
For reasons of safety and certification (CE) the unauthorised conversion
and/or modification of the device is prohibited. Please note that in the event
of damage caused by the manual modification to this device any implied
warranty claims are excluded.
The inside of the device does not contain any parts which require
maintenance, with the exception of wear parts that can be exchanged from
the outside. Qualified staff must carry out maintenance, otherwise the
implied warranty does not apply!
Ensure that power is only supplied after the device has been fully set up.
Always plug in the mains plug last. Ensure that the mains switch is in the
"OFF" position when connecting the device to power.
Only use cables that comply with regulations. Observe that all jacks and
bushes are tightened and correctly hooked up. Refer to your dealer if you
have any questions.
Ensure that when setting up the product the mains cable is not squashed or
damaged by sharp edges.
Prevent the mains cable from coming into contact with other cables! Exercise
great care when handling mains cables and connections. Never touch these
parts with wet hands!
Connect the power cable exclusively to appropriate shock-proof outlets. The
only supply point to be used is a supply outlet in accordance with
specifications of the public supply network.
Disconnect the device from the supply outlet when not in use and before
cleaning! Be sure to hold the mains plug by the body. Never pull the mains
cord!
Position the device on a horizontal and stable low-flame base. When
experiencing feedback, direct the wave field of your loudspeakers away from
the device.
Avoid any concussions or violent impacts when installing or operating the
device.
When selecting the location of installation make sure that the device is not
exposed to excessive heat, humidity, and dust. Be sure that no cables lie
around openly. You will endanger your own safety and that of others!
Do not rest any containers filled with liquid that could easily spill on the
device or in its immediate vicinity. If, however, fluids should access the inside
of the device, immediately disconnect the mains plug. Have the device
checked by a qualified service technician before re-use. Damage caused by
fluids inside the device is excluded from the implied warranty.