Dmx-Protocol; Cleaning And Maintenance; Cleaning The Heating Element; Replacing The Fuse - EuroLite NSF-300 DMX Bedienungsanleitung

Note:
It's necessary to insert the XLR termination plug with 120
proper transmission on the DMX data link.

DMX-protocol

Channel 1: Spray (0-9) OFF, (10-255) ON.
Channel 2: LED in red, (0-9) OFF, (10-255) LED lights up gradually.
Channel 3: LED in green, (0-9) OFF, (10-255) LED lights up gradually.
Channel 4: LED in blue, (0-9) OFF, (10-255) LED lights up gradually.
Channel 5: LED color mixing, (0-9) OFF, (10-255) LED color mixing.
Channel 6: Change the speed of LEDs color automatically, (0-9) OFF, (10-255) getting faster.
Channel 7: LED strobe, (0-9) OFF, (10-255) getting faster.
Channel 8: LED dimming, (0-9) OFF, (10-255) LED lights up gradually.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
Clean the escape nozzle frequently from smoke fluid residues.

Cleaning the heating element

The heating element should regularly be cleaned every 30 operational hours in order to avoid clogging. Use
smoke machine cleaner available at your dealer.
Procedure:
Fill cleaner into empty tank. Run the machine several times in a well-ventilated room only. The number of
repititions depends on the pollution level of the vaporizing elements. After use clean all remaining cleaner
and rinse the tank thoroughly.
The EUROLITE smoke fluids we recommend are non-hazardous to the environment and can be disposed of
via the sewage system.
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Ω in the last lighting in the link in order to ensure
19/20 00075119, Version 1.0