Dmx Protocol; Cleaning And Maintenance - EuroLite 52202179 Bedienungsanleitung

DMX protocol

1-channel mode
Kanal: Wert:
000 – 005
1 006 – 249
250 – 255
3-channel mode
Kanal: Wert:
000 – 005
1
006 – 255
2 000 – 255
000 – 005
3
006 – 255
4-channel mode
Kanal: Wert:
000 – 005
1
006 – 255
2 000 – 255
000 – 005
3
006 – 255
000 – 005
006 – 042
043 – 085
4
086 – 128
129 – 171
172 – 214
215 – 255

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
No function
Flashrate with increasing speed
Continuous „blinder" effect"
No function
Gradual adjustment of the dimmer intensity from 0 to 100%
Strobe effect with increasing duration
No function
Strobe effect with increasing speed
No function
Gradual adjustment of the dimmer intensity from 0 to 100%
Strobe effect with increasing duration
No function
Strobe effect with increasing speed
Special effects
No function
Ramp up
Ramp down
Ramp up-down
Random
Lightning
Spikes
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
DO NOT OPEN FOR 5 MINUTES AFTER SWITCHING OFF!
Funktion:
Funktion:
Funktion:
25/28 00101682, Version 1.0