Dell Broadcom NetXtreme II Benutzerhandbuch Seite 104

iSCSI-Protokoll: Broadcom NetXtreme-II®Netzwerkadapter Benutzerhandbuch
Ereignisprotokollmeldungen
In Tabelle 5 werden die Ereignisprotokollmeldungen für den Offload-iSCSI-Treiber aufgelistet.
Offload-iSCSI-Treiber (OIS-Treiber)
Tabelle 5. Ereignisprotokollmeldungen für den Offload-iSCSI-Treiber (OIS-Treiber)
Meldungsnummer Schweregrad Benachrichtigung
1 Fehler
2 Fehler
3 Fehler
4 Fehler
5 Fehler
6 Fehler
7 Fehler
8 Fehler
9 Fehler
10 Fehler
11 Fehler
12 Fehler
13 Fehler
14 Fehler
15 Fehler
16 Fehler
17 Fehler
18 Fehler
19 Fehler
20 Fehler
21 Fehler
22 Fehler
23 Fehler
24 Fehler
25 Fehler
26 Fehler
27 Fehler
28 Fehler
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/German/iscsi.htm[9/5/2014 3:49:06 PM]
Initiator failed to connect to the target. Target IP address and TCP Port number are
given in dump data.
The initiator could not allocate resources for an iSCSI session.
Maximum command sequence number is not serially greater than expected command
sequence number in login response. Dump data contains Expected Command Sequence
number followed by Maximum Command Sequence number.
MaxBurstLength is not serially greater than FirstBurstLength. Dump data contains
FirstBurstLength followed by MaxBurstLength.
Failed to setup initiator portal. Error status is given in the dump data.
The initiator could not allocate resources for an iSCSI connection
The initiator could not send an iSCSI PDU. Error status is given in the dump data.
Target or discovery service did not respond in time for an iSCSI request sent by the
initiator. iSCSI Function code is given in the dump data. For details about iSCSI
Function code please refer to iSCSI User's Guide.
Target did not respond in time for a SCSI request. The CDB is given in the dump data.
Login request failed. The login response packet is given in the dump data.
Target returned an invalid login response packet. The login response packet is given in
the dump data.
Target provided invalid data for login redirect. Dump data contains the data returned by
the target.
Target offered an unknown AuthMethod. Dump data contains the data returned by the
target.
Target offered an unknown digest algorithm for CHAP. Dump data contains the data
returned by the target.
CHAP challenge given by the target contains invalid characters. Dump data contains the
challenge given.
An invalid key was received during CHAP negotiation. The key=value pair is given in the
dump data.
CHAP Response given by the target did not match the expected one. Dump data
contains the CHAP response.
Header Digest is required by the initiator, but target did not offer it.
Data Digest is required by the initiator, but target did not offer it.
Connection to the target was lost. The initiator will attempt to retry the connection.
Data Segment Length given in the header exceeds MaxRecvDataSegmentLength
declared by the target.
Header digest error was detected for the given PDU. Dump data contains the header
and digest.
Target sent an invalid iSCSI PDU. Dump data contains the entire iSCSI header.
Target sent an iSCSI PDU with an invalid opcode. Dump data contains the entire iSCSI
header.
Data digest error was detected. Dump data contains the calculated checksum followed
by the given checksum.
Target trying to send more data than requested by the initiator.
Initiator could not find a match for the initiator task tag in the received PDU. Dump data
contains the entire iSCSI header.
Initiator received an invalid R2T packet. Dump data contains the entire iSCSI header.