Drill A Hole In The Wall; Connective Pipe And Drainage Installation - Zibro S 30xx series Handbuch

S 3050
90
SC 3050
40
133
Fig. 4
Fig. 5

2. Drill a hole in the wall

1. Determine hole positions according to the diagram detailed in Fig.5. drill one (1) hole (≥ 85 mm for
SC30xx / ≥ 65 mm for S30xx) slanting slightly downwards to outdoor side, this will prevent water to
come indoors.
2. Always use wall hole conduit when drilling metal grid, metal plate or the like.

3. Connective pipe and drainage installation

Always run the drain hose sloping downward all the way. Do not install the drain hose as
illustrated below.
4
70
70 70
750
920
50
Wall
Outdoor
Indoor
≥5°