Indoor Unit Installation; Drill A Hole In The Wall - Zibro SC 3125 kids Gebrauchsanweisung

INDOOR UNIT INSTALLATION

Correct orientation
of Installation Plate
1. Fit the installation plate
1. Fit the installation plate
tion plate.
2. If the wall is made of brick, concrete or the like, drill eight (8) 5mm diameter holes in the wall. Insert
Clip anchor for appropriate mounting screws
3. Fit the installation plate
NOTE
Fit the Installation Plate and drill holes in the wall according to the wall structure and
corresponding mounting points on the installation plate. (Dimensions are in "mm" unless
otherwise stated)
SC 3125
Kids
Indoor
Fig. 5

2. Drill a hole in the wall

1. Determine hole positions according to the diagram detailed in Fig.5. drill one (1) hole (≥ 85 mm) slan-
ting slightly downwards to outdoor side, this will prevent water to come indoors.
4
72
horizontally on structural parts of the wall with spaces around the installa-
.
on the wall with eight (8) type "A" screws
Wall
Outdoor
≥5°
.