Maintenance - DeWalt DW392 Anweisungen

E N G L I S H
Sawing in asbestos cement
When sawing asbestos cement
hazardous dust may be produced.
Follow the statutory guidelines and
observe the recommendations issued by
the asbestos cement manufacturers.
Consult your dealer for further information on the
appropriate accessories.

Maintenance

Your D WALT Power Tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication (fig. F)
• Lubricate the saw blades, the bar and the saw
blade guide slot upon cleaning.
• Regularly apply oil in the oil holes on the bar.
• If the tool will not be used for a long period of
time, coat the saw blades and fill the oil holes
with a little oil (e.g. machine oil). Let the tool run
for a few seconds to enable the oil to reach all
parts. This protects the tool from corrosion.
Cleaning
• Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
• Clean the bar with a mild soap and a slightly
damp cloth. Do not use petrol, turpentine, thinner
or similar products. Do not let liquids enter the
housing.
• Regularly remove the saw blades after cutting
cellular concrete or thermal building blocks.
Thoroughly clean the saw blades and the bar.
To clean the saw blade guide slot use the
scraper supplied with the tool.
24
Unwanted tools and the environment
Take your tool to an authorized D
agent where it will be disposed of in an
environmentally safe way.
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the
performance of your D
it within 30 days, complete as purchased, to the
point of purchase, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your
D WALT tool, in the 12 months following purchase,
E
it will be undertaken free of charge at an authorized
D WALT repair agent. Proof of purchase must be
E
produced. Includes labour and spare parts for
Power Tools. Excludes accessories.
• ONE YEAR FULL WARRANTY •
If your D WALT product becomes defective due
E
to faulty materials or workmanship within
12 months from the date of purchase, we
guarantee to replace all defective parts free of
charge or, at our discretion, replace the unit free
of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by
unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit
and is additional to consumers statutory rights.
For the location of your nearest authorized
D WALT repair agent, please use the appropriate
E
telephone number on the back of this manual.
Alternatively, a list of authorized D
agents and full details on our after-sales service
are available on the Internet at
www.2helpU.com.
WALT repair
E
WALT tool, simply return
E
WALT repair
E