Easy Use; Preparing The Machine; Programme Selection; Auxiliary Functions - Grundig GTN 37110 G Bedienungsanleitung

Easy use

6

6.1 Preparing the machine

1. Plug in the machine.
2. Place the laundry in the machine.
3. Press the on/off/cancel button for 1 second
(long).
4. When your machine is operated for the
first time, it starts with the declaration
programme (wardrobe dryness for
cottons).

6.2 Programme selection

1. Decide the appropriate programme from
the table below which includes drying
levels.
2. Select the desired programme with the
Programme Selection knob.

6.3 Auxiliary functions

Auxiliary functions
Audio Warning
The machine will give an audio warning
when the programme comes to an end. Use
the Audio Warning Level button to adjust
the sound level.
Anti-creasing
A 2-hour anti creasing program to prevent
laundry from creasing will be activated if you
do not take the laundry out after the program
has come to an end. This programme rotates
the laundry in 10-minute intervals to prevent
creasing.

6.4 Starting the programme

Press Start/Pause button to start the
program.
Start symbol will light up to indicate that
the programme has started and ":" symbol
in the middle of the remaining time will keep
flashing.
6.5 Canceling the programme
If you want to stop drying and cancel the
programme for any reason after the machine
has started to run, press and hold the
Off/Cancel button for 3 seconds.
Dryer / User Manual

6.6 End of programme

Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-up
indicator when the programme comes to an
end. The loading door can be opened and
the machine becomes ready for a second
cycle.
Press On/Off/Cancel button to switch off
the machine.
6.7 Child Lock
Machine is equipped with a Childproof Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On/Off/Cancel button
on the control panel are deactivated when the
Child-proof Lock is active.
In order to activate the Child Lock, press
Audio Warning and Child Lock button for 3
seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child Lock should be
deactivated. Press the same button for 3
seconds again to deactivate the Child
Lock.
On/
51 / 60 EN