Troubleshooting
Drum lighting does not turn on. (On models with lamp)
Dryer might not be switched on with the On / Off / Cancel button. >>> Make sure that the
dryer is switched on.
Bulb may have blown. >>> Call Authorized Service Agent to have the lamp replaced.
Filter Cleaning warning symbol light is on.
Lint filter is not cleaned. >>> Clean the lint filter.
Lint Filter Cleaning symbol is flashing.
Filter housing is clogged with lints. >>> Clean the lint filter housing.
A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint
filter with warm water.
Condenser may be clogged.
Water leaks from the loading door
Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the
loading door gasket. >>> Clean the inner surfaces of the loading door and the surfaces of
the loading door gasket.
Loading door opens spontaneously.
The loading door might not be closed securely. >>> Push the loading door to close until you
hear a locking sound.
Water Tank warning symbol is on/flashing.
Water tank may be full. >>> Drain the water tank.
Water draining hose might be bent. >>> If the product is connected directly to a wastewater
drain, check the water drain hose.
Condenser cleaning warning symbol is flashing.
Condenser might have not been cleaned. >>> Clean the Condenser .
A
CAUTION: If you cannot eliminate the problem although you follow the instructions in
this section, consult your dealer or the Authorized Service Agent. Never try to repair a
nonfunctional product yourself.
56 / 60 EN
>>> Clean the Condenser .
Dryer / User Manual