Starting The Programme; Progress Of Programme; Child Lock; In Order To Activate The Child-Proof - Grundig GTN 48271 GC Bedienungsanleitung

Operating the product
Program Started
End Time Enabled
C
Additional laundry may be loaded
or taken out during the End Time
period. At the end of the end Time
countdown process, End Time symbol
disappears, drying process starts and
the programme duration is displayed.
The time on the display is the sum of
normal drying time and End Time.
Changing the End Time
If you want to change the time during
countdown:
1. Press On/Off/Cancel button for 3
seconds to cancel the programme. Repeat
the End Time procedure for the desired
time by turning on the machine again.
2. Machine starts with the declaration
programme (wardrobe dryness for
cottons).
Cancelling the End Time function
If you want to cancel the End Time countdown
and start the programme immediately:
1. Press On/Off/Cancel button for 3
seconds to cancel the programme.
2. Press On/Off/Cancel button to start
the programme you have previously
selected.

5.10 Starting the programme

Press Start/Pause button to start the
program.
The Start
symbol that indicates the startup
of the program lights up. The ":" in the middle
of the screen will continue flashing. Drying
and progress of programme bar on the
display light alternately.
Dryer / User Manual

5.11 Progress of programme

Drying

5.12 Child Lock

Machine is equipped with a Child Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On/Off/Cancel button
on the control panel are deactivated when the
Child Lock is active.

In order to activate the Child-proof

Lock, press and hold Audio Warning and
Child lock buttons for 3 seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child Lock should be
deactivated. Press the same button for 3
seconds again to deactivate the Child
lock.
C
Lock symbol will appear on the
display when the Child Lock is
activated.
Child Lock : On
C
Child Lock is deactivated when the
machine is switched off and on with
On/Off/Cancel button.
59 / 72 EN