Specifications; Eu Declaration Of Conformity - Kärcher K 4.70 Betriebsanleitung

emerges from the high-pressure outlet. Then recon-
nect the high-pressure hose.
- Clean the sieve in the water connection (it can be
easily removed using flat pliers).
- Check the inlet water flow rate.
- Check all supply lines to the pump for leaks or clog-
ging-up.
Strong pressure variations
- Clean the high-pressure nozzle. Remove dirt from
the nozzle boring using a needle, and then rinse the
nozzle with water.
Pump leakage
- A slight leakage of the pump is normal. If you detect
an excessive leakage, please contact the authorized
customer service.
Detergent is not taken in
- Clean the filter of the detergent suction hose.
Spare Parts
Only use original Kärcher spare parts. You will find a list
of spare parts at the end of this document.
Service
Warranty
The warranty terms published by our competent sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is caused
by faulty material or defects in fabrication.
In the event of a warranty claim please contact your
dealer or the nearest authorized Customer Service centre.
Please submit the appliance, including all accessories,
and the proof of purchase.
Customer Service
If you have any further questions or problems, our Kärcher
branches are ready to give you further assistance.

Specifications

Power supply
Voltage (at 1~50 Hz)
Connected load
Mains fuse (delay-action fuse)
Safety class
Water connection
Supply temperature (max.)
Supply volume (min.)
Supply pressure (max.) (12 bar)
Performance data
Working pressure (120 bar)
max. admissible pressure (130 bar)
Flow rate (400 l/min.)
Detergent dosage
Suction height from open container 20°C
Recoil force trigger gun
Appliance vibrations
Sound level, L (EN60704-1)
PA
Sound level, L (2000/14/EC)
WA
Dimensions
Length/width/height 395/205/295 mm
Weight
Circuit diagram
C1 Capacitor
M1 Motor
Q1 Appliance switch
T Temperature limiter
S1 Pressure switch

EU Declaration of Conformity

We hereby declare that the equipment described below con-
forms to the relevant fundamental safety and health require-
230 - 240 V
ments of the appropriate EU Directives, both in its basic design
1.9 kW
and construction as well as in the version marketed by us.This
10 A declaration will cease to be valid if any modifications are made
to the machine without our express approval.
1, IPX5
Product Product Product: Product Product High-pressure cleaner
M o d e l M o d e l M o d e l M o d e l M o d e l: 1.141-xxx
40 °C
10 l/min.
Relevant EU Directives: Relevant EU Directives: Relevant EU Directives: Relevant EU Directives: Relevant EU Directives:
1.2 MPa
98/37/EEC
73/23/EEC (+93/68/EEC)
89/336/EEC (+91/263/EEC, 92/31/EEC, 93/68/EEC)
2000/14/EEC
12 MPa
Harmonised standards applied: Harmonised standards applied: Harmonised standards applied: Harmonised standards applied: Harmonised standards applied:
13 MPa
DIN EN 60 335 – 1
6.7 l/min. DIN EN 60 335 – 2 – 79
DIN EN 55 014 – 1 : 2000 + A1: 2001
0.3 l/min.
DIN EN 55 014 – 2 : 1997
0.5 m
DIN EN 61 000 – 3 – 2 : 2000
15 N
DIN EN 61 000 – 3 – 3 : 1995 + A1: 2001
0.8 m/s²
Conformity assessment procedure followed: Anex V
74.5 dB(A)
Measured sound power level:
90 dB(A)
Guaranteed sound power level:
Appropriate internal measures have been taken to ensure that
series-production units conform at all times to the require-
ments of current EU Directives and relevant standards.The
11.5 kg
signatories are empowered to represent and act on behalf of
the company management.
Alfred Kärcher GmbH & Co.
Cleaning Systems
Alfred-Kärcher-Str. 28–40
P.O. Box 160
D-71349 Winnenden
87 dB(A)
90 dB(A)
English 21