Herunterladen Inhalt Inhalt Diese Seite drucken

Connections And Wiring - auna MD-170-BT Anschluss- Und Anwendungshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Wiring Diagram
Cautions
• The said product is powered by means of a 12VAC accumulator which is grounded via the negative
electrode;
• Please connect as per the wiring diagram so as to avoid any device damage;
• Before connection, strip off the insulation layer long as 5mm on both ends of the wires;
• Do not power on until connection is fi nished;
• Insulate any exposed live part in order to prevent short-circuit with the automobile chassis. Bundle
all the wires and cables so as to prevent any terminals making contact with any metal object;
• Important: As for any automobile equipped with computer or satellite navigation system,
Attention when connecting speakers:
• Do not use any grounded speakers;
• The power of the speaker in use must exceed 40W as it is required to accept maximum output
power of the amplifi er;
• The speaker has resistance ranging between 4~8ohm. Any resistance not covered by such range
could affect output power and even damage the speaker or the said product;
• The speaker wires should be approximately 30mm away from the antenna and antenna extension
cable; Please follow the diagrams below to connect correctly so as to safeguard either the speaker
• or the said product:

Connections and Wiring

15

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10007166

Inhaltsverzeichnis