Pairing And Connection - auna 10027077 Anleitung

PAIRING AND CONNECTION

1 Turn on the BLUETOOTH mode of the mobile phone;
2 Select the item of finding the BT Device and enter it. After finishing the finding, it will show the name
of the BT Device if finding a BT Device. Select it and enter it, then it will show a interface that ask
you to input a password, input the password 0000 and then enter it. Then it will tell you pair OK.
For some mobile phones, they can automatically connect with the BT device of the car audio system
after pairing is ok; for some mobile phones, they need to select the paired BT device and press the
CONNECTION button. When connection is ok, the LCD of the car audio system will show LINK OK.
3 Use the mobile phone to do connection or disconnection. In the connection status, find the paired
and connected BT Device, then press the disconnection button to do disconnection; In the discon-
nection status, find the paired and disconnected BT Device, then press the connection button to do
connection
4 In the CONNECTION STATUS: the audio of mobile phone transfers to the car audio system whene-
ver a dialing takes place or receiving a call.
DIALING WHEN IN CONNECTION STATUS:
Dial with the mobile phone directly. Dial with remote control with the following procedures:
1 Input telephone number with number buttons 0-9. Press CLEAR button briefly to cancel the wrongly
input number if necessary
2 Press TEL briefly to execute the dialing.
To redial the last phone number: Press REDIAL button briefly or the icon
number.
ACCEPT/REJECT/END CALL
• When ringing, press
• When ringing, press
• When ringing, press
Note: During ringing, the phone number appears.
60
or TEL button to accept the call;
or HANG UP button to reject the call;
or HANG UP button to end the call.
to validate the last phone
www.auna.de