Selecting The Telephone Muting - JVC KS-FX460R Bedienungsanleitung

Selecting the initial CD information display
You can select what type of the CD playback information to be initially shown on the display
when you start playing a CD. When shipped from the factory, the disc number and track
number information is selected to be shown.
• DISC: Disc number and track number appear on the display.
• TIME: Elapsed playing time appears on the display.
1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode.
¢
2. Press or
3. Press + or – to select the desired mode.
The initial CD information display changes as follows:
To see the other information while playing a CD, press DISP.
Each time you press the button, the information changes alternately.

Selecting the telephone muting

This mode is used when a cellular phone system is connected. Depending on the phone
system used, select either "MUTING 1" or "MUTING 2," whichever mutes the sounds from this
unit. When shipped from the factory, this mode is deactivated.
• MUTING 1: Select this if this setting can mute the sounds.
• MUTING 2: Select this if this setting can mute the sounds.
• OFF: Cancels the telephone muting.
1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode.
¢
2. Press or
3. Press + or – to select the desired mode.
The telephone muting mode changes as follows:
24
4
to select "CH DISP (changer display)."
TIME
4
to select "TEL (telephone)".
MUTING 1
DISC
MUTING 2
OFF