Santec VTC-HDH422PWD Bedienungsanleitung Seite 37

Bedienungsanleitung / User manual VTC-HDH422PWD /
VTC-HDH432IRPWD / VTC-HDH444PWDU
3. Exposure
The following exposure adjustments can be made:

AGC (Automatic Gain Control):
Automatic gain control to adjust the brightness. The brightness can be re-
adjusted.
off, low, middle or high

Shutter:
A.FLK:
ESC:
Manual:

Sens-up:
The camera automatically detect the light level and creates a clear picture.
You can adjust the shutter speed (x2 – x512). The higher the value, the more
likely you will achieve a clear picture but noise may occur.

Initial Set:
Return to default settings.

Previous:
Return to main menu.
4. Day/Night

Colour:

B/W:

ISC:

Auto:
Note: Day/night function is not active if AGC is switched off in the exposure menu.
_________________________________________________________________________________
The flickerless mode (FLK) reduces picture flickering.
The shutter speed is controlled automatically.
The shutter speed is controlled manually::
1/160 - 1/90000, x2 – x512
Colour picture
Black/white picture
Intelligent IR saturation control. The IR saturation is being
reduced (only for VTC-HDH432IRPWD; factory default).
The picture display adapts tot he environmental illumination:
Colour display for normal light conditions and black/white
display for dim or low light/darkness (only for
VTC-HDH422PWD and VTC-HDH444PWDU; factory default).
- 37 -