IKEA TYDLIG Anleitung Seite 8

ENGLISH
Touch or of the Timer to set the time
00 99
between and
lot light flashes more slowly, the time counts
down. Set the heat settings.
If the heat setting is set and the time set has
elapsed, acoustic signal appears,
es, and cooking zone switches off. If cooking
zone is not in use and the time set has
elapsed acoustic signal appears and
flashes.
Select for a cooking zone to switch off
the function, and the pilot light of the cook-
ing zone selected flashes faster. Touch
and the remaining time counts backwards
00
to . The pilot light goes out.
STOP+GO
The Stop+Go function sets all cooking zones
that operate to the lowest heat setting (
).
When Stop+Go operates, you cannot
change the heat setting.
The Stop+Go function does not stop the tim-
er function.
• To activate this function touch
symbol comes on.
• To deactivate this function touch
heat setting that you set before comes on.
Lock
When the cooking zones operate, you can
lock the control panel, but not
vents an accidental change of the heat set-
ting.
First set the heat setting.
To start this function touch
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
ting that you set before comes on.
minutes. When the pi-
00
flash-
00
. The
. The
. It pre-
. The symbol
. The heat set-
When you stop the appliance, you also stop
this function.
The child safety device
This function prevents an accidental opera-
tion of the appliance.
To activate the child safety device
• Activate the appliance with
set the heat settings.
• Touch
for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
To deactivate the child safety device
• Activate the appliance with
set the heat settings. Touch
onds. The symbol
• Deactivate the appliance with
To override the child safety device for
only one cooking time
• Activate the appliance with
bol comes on.
• Touch
for 4 seconds. Set the heat set-
ting in 10 seconds. You can operate the
appliance.
• When you deactivate the appliance with
, the child safety device operates
again.
Automatic Switch off
The function switches the hob off
automatically if:
• all cooking zones are switched off.
• you do not set the heat setting after
switching on the hob.
• you cover any sensor field with objects (a
pan, a cloth, etc.) for longer than approx.
10 seconds. The cooking zone is switched
off automatically and acoustic signal
sounds until you uncover the sensor fields.
• you do not switch a cooking zone off af-
ter a certain time, or you do not modify
the heat setting, or if the overheating oc-
curs (e.g. when a pan boils dry). The sym-
bol lights up. Before using again, you
must set the cooking zone to
8
. Do not
.
. Do not
for 4 sec-
comes on.
.
. The sym-
.