Werbung
HOW DOES THIS SCALE WORK?
This scale is made up of two main parts – the weighing platform and the display panel.The display panel
is designed to be wall mounted above the worksurface where you intend to use the scale.This keeps
the display at a convenient eye-height where it is easiest to read and the weighing platform within arms
reach for easy access.The weighing platform sits separately on the worksurface from where it transmits
a weight signal to the display panel using infrared (IR) technology.When not in use, the weighing
platform clips onto the display panel and functions as a stylish kitchen clock and room thermometer.
INSERT THE BATTERIES
Insert 3 AAA batteries in the display panel and 4 AAA batteries in the weighing platform (2 in each
compartment). Ensure +/- terminals are the correct way round.
FIXING THE DISPLAY PANEL TO THE WALL
1. Choose a suitable position for the display panel, directly above a worksurface where you intend
to use the scale:
Avoid placing directly next to an electrical appliance (eg microwave oven) that may emit
electrical interference and possibly disrupt the products display.
Allow sufficient room around the display panel for storing the weighing platform.
IF IN DOUBT,TEST THE PRODUCT IN POSITION BEFORE FIXING
2. Drill holes for suitable wall plugs, 72mm apart.
(The wall plugs supplied are suitable for use in most solid walls).
3. Adjust the screws until the display panel is held firmly in place against the wall.
SETTING THE CLOCK
To enter the clock setting
The hour digits
mode: press and hold g-
will flash.
oz for 2 secs.
Now the minute
To advance the
digits will flash.
minutes: press ml-floz.
To advance the hour:
To confirm the hour
press ml-floz.
setting: press g-oz.
To confirm the minute setting: press g-oz.
The correct time will now be displayed.
3
Werbung
