Installation - Electrolux ehe6043 Benutzerinformation

How to prevent a damage to the
appliance
• Do not let acid liquids such as vinegar,
lemon juice or limescale removing agents
to touch the hob. This will cause matt
patches
• Do not place wet pan lids on the hot-
plates and do not let hot pans to cool on
the hotplates. If not condensation and
rust can form.
• Do not let cookware boil dry to prevent
the damage to cookware and hotplate.
• Do not use the solid hotplate with empty
cookware or without cookware.

INSTALLATION

Installation
Warning! Read and follow the
instructions carefully. There is a risk of
injury or damage to the appliance.
• Make sure that the appliance is not dam-
aged because of transportation. Do not
connect a damaged appliance. If it is
necessary, speak to the supplier.
• Installation and connection of the ap-
pliance to the power supply must on-
ly be done by qualified personnel.
• Only use built-in appliances after you as-
semble the appliance into correct built-in
units and work surfaces that obey the
standards.
• Do not change the specifications or mod-
ify this product. There is a risk of injury or
damage to the appliance.
• Fully obey the laws, ordinances, direc-
tives and standards in force in the coun-
try where you use the appliance (safety
regulations, recycling regulations, electri-
cal safety rules etc.).
• Keep the minimum distances to other ap-
pliances and units.
• Install anti-shock protection, for example
install the drawers only with a protective
panel directly below the appliance.
• Prevent damage of the cut surfaces of
the worktop against moisture with a cor-
rect sealant!
• Seal the appliance to the worktop with no
space left with a correct sealant.
• Do not cover any part of the appliance
with aluminium foil.
Disposal of the appliance
• To prevent the risk of physical injury or
damage
– Disconnect the appliance from the
power supply.
– Cut off the mains cable where it con-
nects with the appliance and discard it.
– Speak to your local authorised facilities
for disposal of your appliance.
• Prevent damage of the bottom of the ap-
pliance from steam and moisture, e.g.
from a dishwasher or oven.
• Do not install the appliance adjacent to
doors and below windows. Hot cook-
ware can be hit off the hob when you
open doors or windows.
• Disconnect the appliance from the
electrical supply, before you do
maintenance work or cleaning.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
• The electrical mains terminal is live.
• Make the electrical mains terminal free of
voltage.
• Install correctly to give anti-shock protec-
tion.
• Loose and incorrect mains plug and
socket connections can make the termi-
nal become too hot.
• A qualified electrician must install the
clamping connections correctly.
• Use a strain relief clamp on cable.
• Use the correct mains connection cable
and replace the damaged mains cable
with the proper cable type. Speak to your
local Service Centre.
The appliance must have the electrical in-
stallation which lets you disconnect the ap-
pliance from the mains at all poles with a
contact opening width of minimum 3 mm.
You must have correct isolation devices:
line protecting cut-outs, fuses (screw type
electrolux 11