SKYTRONIC 4CH Gebrauchsanleitung Seite 23

Default Access Point：
Input the access point. System default for the access point is GPRS connection.
Server Address：
Input the public IP address of the router the DVR is attached to (refer to section 5.2.3 Network Setup on page
14 of the product manual).
Server Port：
Web port: Same as the web port setting on the DVR, you need to forward this port from the Router to the
DVR. Setting range is between 1024 and 65535, the default setting is 18600. Note: this port is in addition to
the ports used for standard remote access.
User Name:
Same as user name setup in DVR under Menu, Devices, Mobile
Password：
Same as password setup on DVR. (Please press Function key to save the password, left soft key won't be able to
save the password)
Channel:
Select the channel you want to monitor and click [OK] button to start video connection
Network connection status: percentage of buffer display, connection success, connection fail, play and
stop.
Channel select, PTZ control, Zoom in/out, Focus and Iris
Play/Stop, Full screen/ Normal Display, Capture,
Parameter setting and Exit【】
By clicking on the image you can see it full screen as in Pic 13
Step 1: Download iTunes
Visit Apple website http://www.apple.com/itunes/
Step 2: Download & install surveillance software "Aplayer"
2.1 Register iTunes Store
2.1.1 Run the installed iTunes, you might need to create an account to visit iTunes store firstly. Move to
the menu "Store", and click the option "Create Account".
to download & install the iTunes.
Pic 13