Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2.6.1 HDD Management
Picture 5-30
Picture 5-31
OVERWRITE: If you select "on" the system will automatically overwrite the oldest recordings once the hard
drive is full; if you select "off", recording will stop once the hard drive is full.
HDD FORMAT: You use this option to format the hard drive, you can not record files to the hard drive until it
has been formatted. Click [Format HDD] button to start formatting. When selecting [Format HDD] option the
system will prompt you – "Format HDD will loss all the data, do you confirm?" ; click "OK", system will prompt
you – "Is formatting..." and "successful format"; and then system will restart automatically.
USB FORMAT: Use this option to format USB devices.
5.2.6.2 Alarm Set
Picture 5-32
not external sensors to record on motion detection.
HDD LOSS: Options are On and Off. If you select On there will be a buzzer sound and "H" sign on screen
when HDD is not detected or not formatted; on the contrary, if you close the function, there is only "H" sign to
indicate HDD not found, but no alarm sound when HDD not found or not formatted.
HDD SPACE: Options are On and Off. When the alarm function is on, there are alarm sounds when the
HDD is running out of space; when the function is off, there are no alarm sounds.
VIDEO LOSS: Options are On and Off. When the function is on, system will issue alarm sound and display
video loss on the preview interface; when the function is off, system will have no alarm sound, but the preview
interface will display video loss.
ALARM MANAGE： Alarm Output （0s,10s,20s,40s,60s） 、 Buzzer time (0s,10s,20,40s,60s) and alarm duration
time（0s, 30s, 1minute，2minute，5minute） 。
Click [Main Menu Device
Management] menu (shown as Picture 5-30)
When you install a HDD, the system will automatically detect
if HDD is formatted or not; If HDD needs to be formatted, HDD
status will be shown as "Not format", otherwise, the HDD status
will be shown as "Normal" (refer to Picture 5-31)
TOTAL SPACE: Indicates total space available on Hard
Drive.
FREE SPACE: Indicates unused space available on the
Hard Drive.
USEABLE
REC
detail/quality and frame rate, system will show you how
Recording time you have left on the Hard Drive.
Click [Main Menu Device
menu to setup Alarm warnings (shown as Picture 5-32).
I/O STATUS ： Options include NO (Normal-open), NC
(Normal-close) and OFF. Set to "Normal-open" if you use external
sensor alarms that are normally open, Set to "Normal-close" if you
use external sensor alarms that are normally closed, set to "off" if you
are not going to use external sensor alarms. You can use the DVRs
HDD] to enter [HDD
TIME:
Based
on
Alarm] to enter into [Alarm setup]
current
image
Werbung
Inhaltsverzeichnis
