Input and functions
Training
Strain
Profile
or
or Manually 40-90%
Target pulse 40-200
Time/Distance Swich over
Recover y
Display in case of pulse events
Value / Input
Maximal Pulse
121-210
Off
Target pulse
Fat burning
oder
oder
Manually
Target pulse
40-200
Display colours and their meaning (for Satura P EXT only)
The display can illuminate in 3 different colours: blue, green and red. To ensure an obvious notification of pulse
events the meaning of the colours are defined as follows:
The display illuminates blue if the following conditions apply:
• The pulse monitoring is deactivated
• The target pulse monitoring (-/+ 10 pulses) is active but not reached yet.
• The target pulse monitoring is deactivated, the pulse limit monitoring is active but the pulse is below the selected pulse limit.
• You are in the default area.
The display illuminates green:
The pulse is within the range of the target pulse monitoring (-/+ 10 pulses)
The display illuminates red:
If the pulse limit is exceeded while the pulse limit monitoring is active the display turns red.
Standstill
Strain
Profile
Distance
Time
Energy
Max. Pulse
Fat burning 65%
or Fitness 75%
%
}
65%
Fitness
75%
40-90%
*note: appears only, if the target pulse was achieved once
Exceeding
MAX
+1
+1
+1
+11 –11*
+11 –11*
SM36xx-68
If the entered training pulse (-11
beats) is undercut, the
symbol
shown.
If it is exceeded (+11 beats) the s
bol
"HI" is shown.
If the maximum pulse is exceeded, the
"HI" arrow is flashing and the writing
"MAX" is shown.
If the "alarm sound in case of excee-
ding the maximum pulse" is activated
in individual settings (page 13), addi-
tional sounds are output.
"LO" is
ym-
12
GB