Temperature Control; Operation Parameters - Pkm GS 108.4A++ Bedienungsanleitung

10. Do not tighten the screws of the bottom hinge unless the door is adjusted
properly.
11. Install the worktop.
NOTICE! Adjust the door properly. The seal must close properly.
4

Temperature control

1. Switch on the appliance after the waiting phase and operate it without any food
stored inside approx. 24 hours on maximum setting (4).
2. Set the thermostat to level 2 to 3, the setting levels for daily use.
3. If you desire a colder temperature, set the thermostat from level 2/3 to 4..
4. The setting
appliance to disconnect it from the mains.
5. The description of the setting levels represents standard values only.

Operation parameters

1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
OPERATION
switches off the compressor only.. You must unplug the
After installation wait 4-6 hours,
before you connect your appliance
to the mains!
25
4