Problem Solving - CME Toptel 5 Gebrauchsanleitung

PROBLEM
The appliance does not respond and the TV -
CDR - DVD - SAT - TER selection keys do
not light up when a key is pressed.
The appliance does not respond but the
selection keys do light up.
The selection keys flash.
The remote control commands are not all
working correcting.
The code for your appliance make is not in
the Code Book.
If you have any queries about your remote control:
• read this Instruction Booklet carefully - you will find an answer to most of your questions
• consult our Internet site www.cme.it to answer all your queries more easily and quickly.
You can also write to customer service at telecomandi@cme.it. To facilitate and speed up customer
service operations, please provide the following essential information on your appliances:
Model of CME remote control: _______________ (see body of remote control)
Make of appliance
e.g.: THOMSON
WARRANTY: 2 years
The warranty ceases to be valid if the product
is tampered with or used incorrectly.
Purchase date
The symbol of the crossed trash can shown on the remote control indicates that once the product has reached the end of its working life it
should be disposed of separately from other waste. The user should, therefore, take the remote control to a specialised collection centre
for electronic and electrical waste, or hand it over to the dealer when purchasing a new similar remote control, on a one to one basis. Correct
separated collection for subsequent recycling, processing and environmentally compatible disposal contributes in preventing possible
negative effects on the environment and on health and favours the recycling of the materials used in producing the remote control. Improper
disposal of the product by the user leads to application of the penalties as per legislative decree no. 22/1997 (article 50 and following of
decree no. 22/1997).
14
PR OBLEM SO LVI N G
Type Model
TV 25DU78M
/ /
SOLUTION
Try some of the other frequently-used keys. If the
problem persists, check that the batteries are fitted
correctly. If necessary, replace them with 2 new
1.5 V AAA/LR03 batteries.
Check that the batteries are new and that the remote
control is pointing at the TV without any obstacles
in the way. If required, reset the remote control
code, following the programming procedure.
The batteries are low. Change them.
You may have used the wrong code. Reset the
remote control code, following the programming
procedure.
To find the code with which to programme your
remote control consult the on-line guide at
www.cme.it.
INFO - L I N E
Mod. original remote control
RCT 4000
Dealer's stamp
Brand code
1007