Herunterladen Inhalt Inhalt Diese Seite drucken

System Settings - AEG dvd 4536 Bedienungsanleitung

Dvd-player
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

System settings

05-DVD 4536 N AEG_GB.indd 57
05-DVD 4536 N AEG_GB.indd 57
TV-System
Match the output of the DVD-Player to the colour transfer system of
your replay device. The following options are available:
NTSC: A system primarily used in North America.
PAL: A system commonly used in Europe.
AUTO: Select this setting if your replay device is a multi-system unit.
Screen saver
The player is able to display a still image for any time on the screen. This
can cause damage to the screen. It is therefore recommended to activate
the screen saver. The following options are available:
ON: The screen saver is activated (default setting).
OFF: The screen saver is deactivated.
Video output
With the option „Video" you determine the signal format to be transmit-
ted to your replay device. Choosing the right signal format depends on
the type of connection and the replay device (see also the operating
manual of the replay unit).
Older replay units normally only support the so-called interlaced scan-
ning method („INTERLACE"). With this method the image is composed by
means of two successively built up fi elds. The fi rst fi eld thereby consists
of the even screen lines, the second one of the odd ones. With the „pro-
gressive" Video signal, in contrast, the complete image is build up in a
single process. The thus achieved image quality is normally much higher.
The following options are available:
INTERLACE: Choose this option if your replay device does not
support progressive signals and is connected to the DVD-Player by
means of a Component-Video cable.
RGB: Choose this option if your replay device supports progressive
signals and is connected to the DVD-Player by means of an S-Video
cable or a Composite-Video cable.
PROGRESSIVE: Choose this option if your replay device supports
progressive signals and is connected to the DVD-Player by means of
a Component-Video cable.
S-VIDEO: Choose this option if your replay device supports progres-
sive signals and is connected to the DVD-Player by means of an
S-Video cable.
NOTE:
If the DVD-Player is connected to the replay device by means of a
Composite-Video cable or a SCART-cable, you may choose any set-
ting from this menu.
English
57
30.07.2009 16:50:23 Uhr
30.07.2009 16:50:23 Uhr

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dvd 4536n

Inhaltsverzeichnis