Overview Of The Main Menu; System Settings - AEG DVD 4517 Bedienungsanleitung

Themen Changing the default settings
Overview of the
main menu
2 3
1
Fig. 22

System settings

Fig. 23
Fig. 24
Fig. 25
60
05-DVD 4517 AEG - GB 60
System settings (1)
Language settings (2)
Audio settings (3)
Video settings (4)
4
5 6
Speaker settings (5)
Digital settings (6)
TV-System
Match the output of the DVD-Player to the colour transfer system of
your replay device. The following options are available:
NTSC: A system primarily used in North America.
PAL 60: Choose this setting if you want to play back video material
in the NTSC standard but your playback device is not a multi-sys-
tem machine.
PAL: A system commonly used in Europe.
AUTO: Select this setting if your replay device is a multi-system
unit.
Screen saver
The player is able to display a still image for any time on the screen.
This can cause damage to the screen. It is therefore recommended to
activate the screen saver. The following options are available:
ON: The screen saver is activated (default setting).
OFF: The screen saver is deactivated.
Video output
With the option „Video Output" you determine the signal format to be
transmitted to your replay device. Choosing the right signal format
depends on the type of connection and the replay device (see also the
operating manual of the replay unit).
Older replay units normally only support the so-called interlaced
scanning method („INTERLACE"). With this method the image is
composed by means of two successively built up fi elds. The fi rst fi eld
thereby consists of the even screen lines, the second one of the odd
ones. With the „progressive" Video signal, in contrast, the complete
image is build up in a single process. The thus achieved image quality
is normally much higher.
The following options are available:
INTERLACE-YUV: Choose this option if your replay device does
not support progressive signals and is connected to the DVD-Play-
er by means of a Component-Video cable.
P-SCAN YPBPR: Choose this option if your replay device sup-
ports progressive signals and is connected to the DVD-Player by
means of a Component-Video cable.
S-VIDEO: Choose this option if your replay device supports pro-
gressive signals and is connected to the DVD-Player by means of
an S-Video cable.
TV-RGB: Choose this option if your replay device supports pro-
gressive signals and is connected to the DVD-Player by means of
an S-Video cable or a Composite-Video cable.
19.01.2006, 10:53:29 Uhr