Stopping The Replay - AEG dvd 4536 Bedienungsanleitung

English
54

Stopping the replay

Ripping (CD-MP3 Conversion)
05-DVD 4536 N AEG_GB.indd 54 05-DVD 4536 N AEG_GB.indd 54
Selecting a fi le
If you want to play only one fi le or if you want to start the replay from
a certain fi le, please proceed as follows:
1. Select the fi le type and the directory which contains the desired fi le
as described above. ➯ Page 53, „Selecting fi le/directory and starting
replay", item 1-3.
2. Use the Cursor Buttons ( ,
change to the directory overview.
3. Choose the desired fi le. The currently selected fi le is highlighted in
orange. If necessary change the fi le with the Cursor Buttons ( , ).
Press the „ " button (Fig. 3/11) on the remote control to stop the replay.
With an audio CD running you can activate the ripping function. This
function allows you to convert the data on the audio CD into the MP3
format and store on your connected MP3 player or inserted memory
card.
NOTE:
You can move through the ripping menu with the Cursor buttons (Fig.
3/30) and change the settings with the ENTER button (Fig. 3/7).
1. Press the RIPPING button (Fig. 3/13) to call up the ripping menu.
2. Perform the required adjustments under „OPTIONS".
Speed: Here you can select the speed with which the tracks are to be
converted. The options available are
1X = real time and 4X = Fast.
Bitrate: Here you can select the desired bit rate.
Create ID3 TAG: Select whether ID3 information should be created
( = Yes, = No).
NOTE:
This is only possible in the case of CDs which contain fi le informa-
tion.
Create Playlist: Select whether a PC playlist should be created
( = Yes, = No).
3. Under „TRACKS" you can now select the tracks to be converted with
the arrow buttons and the ENTER button (= selected).
4. Under „START" you are shown the number of selected tracks, the
total track length and the required disc space.
NOTE:
If you would like to convert all of the tracks on the CD, select
the box in the top line under „TRACKS".
In order to delete your selection, deactivate the box again.
5. Now select the „START" fi eld press the ENTER button (Fig. 3/7).
6. The conversion begins. Progress is shown on the screen.
) (Fig. 3/30) on the remote control to
30.07.2009 16:50:21 Uhr 30.07.2009 16:50:21 Uhr