Using A Memory Card - AEG dvd 4536 Bedienungsanleitung

English
52
Using CD/DVD

Using a memory card

Using a USB medium
05-DVD 4536 N AEG_GB.indd 52 05-DVD 4536 N AEG_GB.indd 52
1. Place the CD or DVD on the tray ➯ Page 47, „Loading a CD/DVD".
2. Select the desired fi le(s) and start the replay ➯ Page 53, „Selecting
fi le/directory and starting replay".
The following memory cards can be used:
SD-Card
Multi Media Card
Memory-Stick
1. Insert the memory card into the card reader (Fig. 1/2).
2. Press the USB button (Fig. 3/9) on the remote control in order to
turn the DVD player to the fi le mode.
3. Use the Cursor Buttons (Fig. 3/30) to select the „CARD" mode. Con-
fi rm with the ENTER (Fig. 3/7) button.
NOTE:
In order to fi nd out which fi les can be played back the DVD player
now reads the contents of the storage medium. In the case of large
storage media this procedure may take a long time.
4. Select the desired fi le(s) und start playback ➯ Page 53, „Selecting
fi le/directory and starting playback".
5. If you would like to change back to DVD mode, press the USB but-
ton (Fig. 3/9) again. Use the Cursor Buttons (Fig. 3/30) to select the
„DISC" mode. Confi rm with the ENTER (Fig. 3/7) button.
By means of the USB connection you can connect numerous devices to
the DVD Player.
This device has been developed in accordance with the latest technical
developments in the USB fi eld. Unfortunately the large number of dif-
ferent types of USB storage media on off er today makes it impossible to
guarantee full compatibility with all USB storage media. For this reason
there may be problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
1. Insert a USB storage medium directly into the corresponding con-
nection of the DVD player (Fig. 1/10).
2. Press the USB button (Fig. 3/9) on the remote control in order to
turn the DVD player to the fi le mode.
3. Use the Cursor Buttons (Fig. 3/30) to select the „USB" mode. Confi rm
with the ENTER (Fig. 3/7) button.
NOTE:
In order to fi nd out which fi les can be played back the DVD player
now reads the contents of the storage medium. In the case of large
storage media this procedure may take a long time.
4. Select the desired fi le(s) und start playback ➯ Page 53, „Selecting
fi le/directory and starting playback".
5. If you would like to change back to DVD mode, press the USB but-
ton (Fig. 3/9) again. Use the Cursor Buttons (Fig. 3/30) to select the
„DISC" mode. Confi rm with the ENTER (Fig. 3/7) button.
30.07.2009 16:50:21 Uhr 30.07.2009 16:50:21 Uhr