Overview Of The Main Menu; System Settings - AEG DVD 4543 HDMI Bedienungsanleitung

English
56

Overview of the main menu

System settings

05-DVD 4543_AEG_GB.indd 56

System settings (1)

Language settings (2)

Audio settings (3)

Video settings (4)

Speaker settings (5)

Digital settings (6)

NOTE:
Some of the menu settings are only available in stop mode (depending
on the DVD).
TV-System
Match the output of the DVD-Player to the colour transfer system of
your replay device. The following options are available:

NTSC: A system primarily used in North America.

PAL: A system commonly used in Europe.
 AUTO: Select this setting if your replay device is a multi-system unit.
Screen saver
The player is able to display a still image for any time on the screen. This
can cause damage to the screen. It is therefore recommended to activate
the screen saver. The following options are available:

ON: The screen saver is activated (default setting).
 OFF: The screen saver is deactivated.
Video output

NOTE:
The "Video output" menu is only available if the "480P/576P" option is
activated in the "HD output" menu.
With the option "Video" you determine the signal format to be transmit-
ted to your replay device. Choosing the right signal format depends on
the type of connection and the replay device (see also the operating
manual of the replay unit).
Older replay units normally only support the so-called interlaced scan-
ning method ("INTERLACE"). With this method the image is composed by
means of two successively built up fields. The first field thereby consists
of the even screen lines, the second one of the odd ones. With the "pro-
gressive" Video signal, in contrast, the complete image is build up in a
single process. The thus achieved image quality is normally much higher.
The following options are available:

INTERLACE: Choose this option if your replay device does not
support progressive signals and is connected to the DVD-Player by
means of a Component-Video cable.
 RGB: Choose this option if your replay device supports progressive
signals and is connected to the DVD-Player by means of an S-Video
cable or a Composite-Video cable.
25.09.2009 9:00:49 Uhr