Using Cd/Dvd; Working In Fi Le Mode - AEG DVD 4534 Bedienungsanleitung

Creating a playlist (CD/DVD)
Fig. CD
Fig. DVD
Deleting a playlist (CD/DVD)

Using CD/DVD

05-DVD 4534 N AEG_GB.indd 49 05-DVD 4534 N AEG_GB.indd 49
It is possible that you may not wish to play the titles in the same order
that they are to be found on the DVD. The function „Create Playlist" you
can create your own playing order.
To do this, proceed as follows:
1. Press the PROG button (Fig. 3/29). A table is displayed. Here you can
enter the desired order of tracks (in the case of CDs/MP3 CDs) or
chapters/titles (in the case of DVDs).
NOTE:
However, your playlist will be lost when switching off the DVD-
Players or when inserting a new DVD.
2. Use the Cursor Buttons (Fig. 3/26) to navigate in the table.
3. Enter the desired title and chapter at the relevant position in the
table. Use the Numerical Buttons (Fig. 3/2) for this purpose.
4. Use the Cursor Buttons (Fig. 3/26) to select the command "PLAY" at
the bottom of the screen to save the input.
5. Press the ENTER button (Fig. 3/7) on the remote control to confi rm
this command.
1. Press the PROG button. You will now see a table.
2. Use the Cursor Buttons (Fig. 3/26) to manoeuvre to the command
"CLEAR" at the bottom of the table.
3. Press the ENTER button (Fig. 3/7) on the remote control to confi rm
this command.
4. Press the PROG button to terminate this procedure.

Working in fi le mode

As well as being able to play back „normal" fi lms or music from CDs/
DVDs, this DVD player is also able to play back video or audio fi les from
CDs or DVDs which are stored in the fi le system. Such media are fre-
quently available if you create CDs of digital photographs or MP3 music
on your computer.
1. Place the CD or DVD on the tray ➯ Page 45, „Loading a CD/DVD".
2. Select the desired fi le(s) and start the replay ➯ Page 50, „Selecting
fi le/directory and starting replay".
English
49
16.06.2009 9:47:31 Uhr 16.06.2009 9:47:31 Uhr