Switching The Appliance On; Setting The Temperature - Bosch KSV Serie Gebrauchsanleitung

en
Controls
Fig. "
1
On/Off button
Serves to switch the whole
appliance on and off.
2
"super" button
Switches super freezing on and
off.
Illuminates when super freezing is
on.
3
Temperature selection button
The required temperature is set
with this button.
4
Temperature display
Indicates the set temperature of
the freezer compartment.
5
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
Switching
the appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
A warning signal sounds.
The temperature display 4 flashes
and the alarm button 5 is lit.
Press the alarm button 5. The warning
signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 4 is lit.
30
Operating tips
After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Fig. "
Freezer
The temperature can be set from
-16 °C to -26 °C.
Keep pressing temperature setting
button 3 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.