Inhaltsverzeichnis
Werbung
Warning
!
Never connect the appliance to electronic
energy saver plugs or to power inverters
which convert the direct current to 230 V
alternating current (e.g. solar equipment,
power supplies on ships).
Switching on
the appliance
Fig. 2
Switch on the appliance with On/Off
button 1.
A warning signal sounds. AL" flashes
on the temperature display 8.
Press the alarm" button 2.
The warning signal switches off.
The factory has recommended and set
the following temperatures:
Refrigerator compartment:
Freezer compartment:
Operating tips
S The sides of the housing are sometimes
heated slightly. This prevents conden
sation in the area of the door seal.
S If the air humidity is high, condensation
may form in the refrigerator compart
ment, especially on the glass shelves.
If this is the case, pack or wrap the food
and select a lower temperature in the
refrigerator compartment.
S It is quite normal for condensation
droplets or frost to form on the inside
of the back panel. This frost thaws
automatically and runs into the
evaporation pan via the condensation
channel. Keep the condensation
channel and outlet clean; condensation
must be able to flow out. Fig. 3
S When the freezer compartment has
reached its operating temperature, AL"
display 8 goes out.
S If you cannot open the freezer com
partment door immediately after closing
it, wait 2-3 minutes until the partial
vacuum has equalised.
S The fully automatic Nofrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
Selecting the
temperature
Fig. 2
Fridge
(can be selected from +2 °C to +11 °C)
Select refrigerator compartment with the
+4 °C
cooler" button 5, then set the required
-18 °C
refrigerator compartment temperature
with button 6.
Freezer compartment
(can be selected from -16 °C to -26 °C)
Select freezer compartment with the
freezer" button 4, then set the required
freezer compartment temperature with
button 6.
en
23
Werbung
Inhaltsverzeichnis
