Bosch KAD62P91 Gebrauchs- Und Montageanleitung Seite 35

[eco]
The [eco] function switches the
appliance to energy saving mode.
The appliance automatically sets the
following temperatures:
Refrigerator compartment:
Freezer compartment:
Switching on the [eco]
1. Press the options" button until
[eco] is selected with a triangle.
2. Activate by pressing the +"
selection button (function is
framed).
Switching off the [eco]
1. Press the options" button until
[eco] is selected with a triangle.
2. Deactivate by pressing the -"
selection button (function is no
longer framed).
[vacation]
If leaving the appliance for a long period
of time, you can switch the appliance
over to the energy saving holiday mo
de. The temperature in the refrigerator
compartment is auto matically swit
ched over to +14 °C.
Attention!
Do not store any food in the refrigerator
compartment during this time!
Switching on the [vacation]
1. Press the options" button until
[vacation] is selected with a triangle.
2. Activate by pressing the +"
selection button (function is framed).
Switching off the [vacation]
1. Select [vacation] function until a
triangle is displayed.
2. Switch off by pressing the -"
selection button (function is no
longer framed).
[clock]
The time is indicated on the time dis
play panel. The time can be set with the
[clock] function.
Setting the time
1. Press the options" button until
+6 °C
[clock] is selected with a triangle.
-16 °C
2. Activate by pressing the +"
selection button (function is
framed).
3. Press the +" or -" selection
buttons to set the required time.
4. Save the set time with the options"
button.
Note
If the [timer] function is switched on, the
time is not displayed.
[IWD off]
You can use this function to switch off
the ice and water dispenser.
Attention!
Before switching off the ice maker, it is
most important that you switch the
water supply to the appliance off for a
few hours.
Empty and clean ice cube container.
Re-attach the ice cube container.
Ensure that the ice cube container
engages with the support.
Switching on the [IWD off]
1. Press the options" button until the
[IWD off] function is selected with a
triangle.
2. Activate by pressing the +"
selection button (function is
framed).
Switching off the [IWD off]
1. Press the options button until the
[IWD off] function is selected with a
triangle.
2. Deactivate by pressing the -"
selection button (function is no
longer framed).
[quick ice]
You can use this function to accelerate
the production of ice cubes.
Switching on and off
Press the super/quick ice" button (only
functions if the freezer compartment,
refrigerator compartment and
cool fresh compartment displays have
not been selected on the display
panel).
When switched on, [quick ice] is
indicated on the display panel.
Note
If the [quick ice] function is activated,
the power of your appliance is
increased intermittently. This increases
the energy consumption.
[filter change]
After 6 months you are prompted via
the [filter change] display message to
change the water filter cartridge.
Activating the function
To reactivate the [filter change] function
after changing the filter:
1. Change water filter cartridge (see
chapter Water filter").
2. Press the options" button until the
[filter change] function is selected
with an arrow.
3. Press selection buttons -" or "+".
[filter change] display goes out.
en
35