Switching The Appliance On; Operating Tips; Setting The Temperature - Bosch GSN Serie Gebrauchsanleitung

Switching
the appliance on
Fig. 2
Switch on the appliance with the On/Off
button 1.
A warning signal sounds. The
temperature display 2 flashes.
Press the temperature selection
button 4. The warning signal switches
off.
When the freezer compartment has
reached the set temperature,
the temperature display 2 is lit.

Operating tips

After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Fig. 2
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature selection
button 4 until the required freezer
compartment temperature is set. The
value last selected is stored.
The set temperature is indicated on
display 2.
We recommend a factory setting of
-18 °C in the freezer compartment.
en
25