AEG SANTO C 8 16 40-5 i Gebrauchs- Und Einbauanweisung Seite 36

Place the small square on the guide
again and fix it with the screws sup-
plied.
Should the lining up of the furniture
door be necessary, use the clearance
of slots.
At the end of operations, it is neces-
sary to check if the door of the fur-
niture closes properly.
Fix cover (Hd) on guide (Hb) until it
clips into place.
If the appliance is fixed to the side of
the kitchen unit, simply slacken the
screws in the fixing brackets (D),
move the brackets as shown in figu-
re and re-tighten the screws. Fit
cover (E).
36
Hb
PR168
Hb
Hd
PR167/1
D734
D
E