Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
SAFETY INSTRUCTIONS
•
Parents and supervisors should be aware of their responsibility, since, due to children's
natural playfulness and love of experimentation, situations and conduct will likely arise for
which the training unit is not intended.
•
If you allow a child to use the product, do not leave it unattended during use. Make all
necessary adjustments to the product yourself and supervise the child during exercise.
CAUTION - RISK OF INJURY
•
Do not use the product if it is damaged or defective. In this case, contact a professional
workshop or our customer service.
•
Always verify that the product is in impeccable condition before use. Defective components
must be replaced immediately as failure to do so may impair the functioning and safety
of the unit.
•
Make sure that no more than one person uses the product at a time.
•
Always use the product on a horizontal, level, nonslip and solid surface. Never use the product
near water and make sure there is a safety clearance of at least 1 meter on both sides and
2 meters behind and in front of the device. Do not put any objects into any openings on
the product.
CAUTION - PRODUCT DAMAGE
•
Do not alter the product in any way and use only original replacement parts. Have all repairs
carried out in a professional workshop or from similarly qualified persons - improper repairs
can lead to serious risks for the user. Use the product for the intended purposes as described
in this user manual only.
•
Shield the product from spraying water, moisture, high temperatures and direct sunlight.
INFORMATION ON ASSEMBLY
•
Assembly of the product must be carried out carefully by an adult person. Ask for the
assistance of another, technically-skilled person in case of doubt.
•
Before beginning assembly of the product, read all assembly steps carefully and review
the diagram.
•
Remove all packaging materials and place all individual components on a free surface. This
will give you a good overview and simplify assembly. Shield the assembly surface from filth
and scratching by laying down suitable padding.
•
Check the components against the components list to make sure all are present. Do not
dispose of the packaging materials until assembly is complete.
•
Please note that there is always a risk of injury when using tools to carry out manual tasks.
Therefore, please exercise caution when assembling this product.
•
Make sure your work environment is hazard-free. For example, do not leave any tools lying
around. Place the packaging materials somewhere where they will not pose any hazards
during assembly. Packaging foil or plastic bags pose a suffocation hazard for children!
•
After assembling the product according to the instructions, make sure that all screws, bolts
and nuts are installed correctly and tightened.
•
If necessary, lay out protective padding (not included) beneath the product to protect your
floor as there is no guarantee that, for instance, the rubber feet will not leave marks behind.
SP-HT-9800-iE-IM-DE+GB+FR-04.indb 28-29
28
3. EXPLODED DIAGRAM
4L
5
6
7
10L
11
8
12
26
25
24
27
13
33L
32
29
14
31
30L
28L
19
23
22
21
20
5
43
36
44
37 38 39
45
40
41
34
35
42
85
A
46
47 48
86
49 50 51
88
46
34
87
1
2
3
4R
707172 73
9
64
10R
65 66
11
67 68 69
74
70
75 76
77 78
79 80
81 82
83 84
63
15 16
62
A
17
20
61
18
60
59
58L
58R
57
51
51
28R
48
32
5
34
31
30L
52 53
54 55
56
B
34
29
10/6/2016 2:30 PM
33L
Werbung
Kapitel
Inhaltsverzeichnis
