Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To automatically play the traffic informa-
tion (EON-TI)
When the traffic information is broadcast, the radio switches to it automatically.
1
Tune in to an RDS station (when a station name is displayed).
2
Press the EON button when "EON" appears.
"PTY TI" and "SELECT" will appear alternately for about 6 seconds.
If the EON button is pressed when "EON" is not displayed, "NO EON" will appear for 5
seconds to indicate that the unit cannot enter the EON stand-by mode.
3
Whilst they are displayed, select the TI (Traffic Information) by
pressing the TUNER PRESET
or
4
Within 4 seconds, press the ENTER button.
"TI" and "WAITING" will appear for 2 seconds each.
"TI" will appear, and the unit will enter the EON-TI stand-by mode.
5
6
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. ("TI"
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it
again. ("TI" will go out.)
button.
When a TA specified starts on an ON (other network) station, the
unit will automatically switch to that station, and "TI" will flash.
When the traffic announcement is over, the unit will automatically
return to the original station you were tuned to.
01/4/25
SG11H_E23-32.fm
SD-SG11H
"WAITING")
E-30
D
F
S
V
I
N
E
Werbung
Kapitel
Inhaltsverzeichnis
