Sharp SD-SG11H Bedienungsanleitung Seite 152

SD-SG11H
Using the Radio Data System (RDS) (continued)

To automatically play the desired pro-
gramme (EON-PTY)
When the desired type of programme is broadcast, the radio switches to it automati-
cally.
1
Tune in to an RDS station (when a station name is displayed).
2
Press the EON button when "EON" appears.


"PTY TI" and "SELECT" will appear alternately for about 6 seconds.


If the EON button is pressed when "EON" is not displayed, "NO EON" will appear for 5
seconds to indicate that the unit cannot enter the EON stand-by mode.
3
Whilst they are displayed, select the desired programme type by
pressing the TUNER PRESET


The selected programme type will flash.
4
Within 4 seconds, press the ENTER button.


The selected programme type and "WAITING" will be displayed for 2 seconds each.


"PTY" will appear, and the unit will enter the EON-PTY stand-by mode.
E-29
or button.
5
When the specified programme starts on an ON (other network) sta-
tion, the unit will automatically switch to the station and "PTY" will
flash.
6
When the programme is over, the unit will automatically return to the
original station.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. ("Programme type"
"WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it
again. ("PTY" will go out.)
About the PTYI (Dynamic PTY Indicator):
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received. Dynamic PTY indicates that the PTY for the station tuned in, or the PTY ref-
erenced in the EON data, is assessed whenever the programme changes or may be
changed.
PTYI
Lights up Tuned into a dynamic PTY station.
Goes out Tuned into a static PTY.


When "PTYI" appears, press the DISPLAY button to check the type of the current
programme.
01/4/25 SG11H_E23-32.fm
Meaning