Herunterladen Inhalt Inhalt Diese Seite drucken

External Fm Or Am Aerial - Sharp SD-SG11H Bedienungsanleitung

1-bit digital audio komponente
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SD-SG11H
System Connections (continued)
 Connecting MD/CD/tuner unit and amplifier
unit
Connect the tuner unit and the amplifier unit using the sound connection lead and the
system connection lead included with this unit.
MD/CD/tuner unit
SYSTEM OUT
White
Red
Plug in with
mark facing up.
Unplug it whilst pressing the lug on the connector.
E-11
Amplifier unit
SYSTEM IN
Plug in with
mark facing down.
White
Red
Sound connection lead
System connection lead
 Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power
lead to the AC power input socket, then plug the AC power lead of this unit into the
wall socket.
Notes:

When you cannot identify the polarity of the wall socket without an earth terminal,
try to plug it upside down or other methods to obtain the optimal sound quality.

Unplug the unit if it will not be used for a prolonged period of time.

Never use a power lead other than the one supplied. Otherwise, a malfunction or
an accident may occur.

 External FM or AM aerial

Use an external FM or AM aerial if you require better reception. Consult your dealer.
External AM aerial
15 m (49 feet)
External FM aerial
7.5 m
(25 feet)
Earth rod
Notes:

When an external FM aerial is used, disconnect the supplied FM aerial wire from
the FM 75 OHMS socket.

When using an external AM aerial, be sure to keep the wire of the AM loop aerial
connected.
01/5/9
SG11H_E01-14.fm
Wall socket
(AC 230V, 50 Hz)
AM loop aerial

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis