Adjusting The Recording Level - Sharp SD-SG11H Bedienungsanleitung

Recording on the top position of a
recorded MiniDisc
1
Prepare for recording.
To record from a CD: To record from the radio:
Load the desired CD and a recordable Tune in to the desired station and load
MiniDisc. a recordable MiniDisc.
2
Press the TOP POSITION button.
One more press will cancel the top position mode.
3
Start recording.
To record from a CD: To record from the radio:
Press the HIGH or NORMAL button. Press the MD
the REC
When the recording is finished, the top position mode will be cancelled.
The recorded track will be the first track on the MiniDisc.
All the tracks previously recorded will be renumbered.
Note:


Whilst in the pause mode or recording, the top position mode cannot be set or
cancelled.

Adjusting the recording level

You can adjust the recording level depending on the recording source by watching the
level meter.
1
Press the CD
2
Press the
3
Press the REC MODE button to select the recording mode.
4
Press the CD
5
Press the REC
6
Press the REC LEVEL/CURSOR
ing level.
button after pressing
button.


Maximum level should not exceed "0dB".


The recording level can be adjusted in 2dB intervals between - 4dB and +10dB.


At this time, you can adjust the recording level with the
7
Press the CD
8
Press the
recorded.
9
Press the CD
To stop recording:
Press the MD
The MiniDisc will stop.
The CD will continue playback.
button.
or button to select the desired track.
button to start playback.
button to pause recording.
or button to adjust the record-
0dB
Level meter Recording level
button.
or button again to select the desired track to be
button again to start recording.
button.
01/4/26 SG11H_E33-58.fm
SD-SG11H
-4dB ··· +10dB
or button.
E-36
D
F
S
V
I
N
E