Control Board - EuroLite LED IP T1000 TCL Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
The main menu is accessed by pressing Menu until the display is lit. Browse through the menu by pressing
Up or Down. Press the Enter button in order to select the desired menu. You can change the selection by
pressing Up or Down. Confirm every selection by pressing the Enter button. You can leave every mode by
pressing the Menu button. The functions provided are described in the following sections.
Default settings shaded.
Main
Sub menu
menu
ADDR 001~ XXX
R
G
B
SHUT
STAT
None, R, G, B, R,
PRSC
Golden, 2700 K,
CAL
CHMD
SET
LIN, SQR, ISQR,
DIM
DISY
Display
0-255
0-255
0-255
0-255
G, B, Yellow,
Pink, Cyan,
Orange, Violet,
3200 K, 4000 K,
5500 K, 6500 K,
RGB
R 0-255
G 0-255
B 0-255
USE Yes/No
9CH
6CH
5CH
4CH
3CH
3CH.
SCUR, LIN.,
SQR., ISQR.,
SCUR.
ON
2MIN
DMX address setting
Dimmer intensity of LED colors
(Master mode)
Please note: In order to save the color
value set via the UP/DOWN button,
press ENTER twice (until the display
shows xxx-).
Strobe effect with increasing speed
Preset colors and color temperatures
(Master mode)
Max. output limitation of LED colors/
White balance
Setting DMX channel mode
LIN - Linear dimmer curve, response
characteristics of LED,
SQR - Square dimmer curve,
response characteristics of LED,
ISQR - Inverse square dimmer curve,
response characteristics of LED,
SCUR - S-shaped dimmer curve,
response characteristics of LED,
LIN. - Linear dimmer curve, response
characteristics of halogen lamp,
SQR. Square dimmer curve, response
characteristics of halogen lamp,
ISQR. - Inverse square dimmer curve,
response characteristics of halogen
lamp,
SCUR. - S-shaped dimmer curve,
response characteristics of halogen
lamp
Display shutoff
ON – permanent on
2MIN - shut off the display after 2
minutes
27/36
Function
00101912, Version 1.0