Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BEFORE USING THE APPLIANCE THE FIRST TIME
1.
Remove all packaging materials and any transport safety devices. Keep
packaging materials away from children - danger of suffocation!
2.
Clean all parts with a damp cloth, as described in the chapter "Cleaning
and care".
3.
Check to make sure that the appliance is stable.
4.
Connect the base via the power cord to the power supply (230 V~, 50 Hz).
5.
Remove the kettle from the base.
6.
Open the lid.
7.
Add clear, cold water to the "Max" marking.
8.
Close the lid by pressing lightly.
9.
Place the kettle level on the base.
10. Switch on the kettle by pressing the ON/OFF switch downwards into the
„I"-position. The kettle cannot be switched on if it is not properly seated on
the base.
11. When the water boils, the appliance automatically shuts off.
12. For hygienic reasons, please discard the water from the first boiling.
OPERATION
1.
Remove the kettle from the base.
2.
Open the lid.
3.
Fill the kettle with at least 0.5 liters of water. Do not fill the kettle with more
than 1.0 liters of water ("Max" marking).
4.
Close the lid by pressing lightly.
5.
Place the kettle level on the base.
6.
Switch on the kettle by pressing the ON/OFF switch downwards into the
„I"-position. The kettle cannot be switched on if it is not properly seated on
the base.
7.
When the water boils, the appliance automatically shuts off.
8.
If the kettle is lifted up before the water boils, it has to be switched off by
pressing the I/O switch. If the appliance is not switched off and then placed
back on the base, the boiling will be continued.
9.
If you want to boil more water, please allow the appliance to cool off for a
few minutes.
Copyright UNOLD AG | www.unold.de
19
Werbung
Inhaltsverzeichnis
