Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Care; General Notes; Troubleshooting; Technical Specifications - Kärcher FP 303 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für FP 303:
Inhaltsverzeichnis

Werbung

transport lock into the intake of the second
pad holder and lock into place.
Store the appliance upright in a dry room.

Maintenance and care

Risk of injury
Turn off the appliance and remove the mains
plug prior to any care and maintenance
works.
Cleaning the appliance and accessories
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in wa-
ter.
Cleaning the polishing pads
Remove and tap the polishing pads after
every use. Wash and dry as needed.
Note: Can be washed at 60 °C; please do
not use any soft detergents, do not dry in
dryer.
Place dry polishing pads into the storage
compartment.
Inserting a filter bag
Change the filter bag at regular intervals.
See Chapter "Inserting a filter bag".
Replacing polishing pads
Check the state of the polishing pads at regu-
lar intervals; replace them if they are worn out.
See Chapter "Insert the polishing pads".

General notes

Warranty
The terms of the guarantee applicable in each
country have been published by our respec-
tive national distributors. We will repair possi-
ble faults on your unit free of charge within the
warranty period, insofar as the faults are
caused by material defects or defective work-
manship. Guarantee claims should be ad-
dressed to your dealer or the nearest
authorized customer service centre, and sup-
ported by documentary evidence of purchase.
(See address on the reverse)
Customer Service
Our KÄRCHER branch will be pleased to help
you further in the case of questions or faults.
(See address on the reverse)
Ordering spare parts and special attach-
At the end of the operating instructions you
will find a selected list of spare parts that are
often required.
You can procure the spare parts and the at-
tachments from your dealer or your KÄRCH-
ER branch office.
(See address on the reverse)

Troubleshooting

Discs running unevenly / rattling sound
This sound is caused by the system. The
appliance was not stored with the trans-
port lock activated. This sound will disap-
pear on its own after a while during
polishing.

Technical specifications

Voltage
Current type
Protective class
Connected load
Rotating speed, polishing
discs
Weight
Dimensions
Volume, filter bag
Subject to technical modifications!
ments
230 V
1~50/60 Hz
II
600 W
1000 rpm
7 kg
385 x
mm
340 x
1155
4 l
English 11
English
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis