VFR 20 - VFR 70
Fig. 14: Insert the heating element through the openings in
the side panel insulation.
Fig. 15: Insert the second and third layers of core bricks. In-
sert the second heating element.
EN-24
Fig. 16: Once the fourth layer of core bricks has been put in
place, insert the upper heating element. Insert the fifth layer
of core bricks underneath the heating element.
Fig. 17: Insert the top layer of core bricks in the same man-
ner. Check that the heating element can slide freely. Jammed
heating elements will be noisy.
Clean the airflow release space and switching space.
459562.66.01 · 03/15/C
www.dimplex.de