Scallop Stitching; Twin Needle - Silvercrest SNM 33 B1 Bedienungs- Und Sicherheitshinweise

Scallop stitching

1

Twin needle

a a
1
Stitch
You can produce a decorative edge with the
scallop stitch.
1. Sew the scallop stitch along the edge of
the material.
2. If desired, trim around the scallop with
scissors to create a scalloped edge. Be
careful not to cut the thread.
2
Stitch
A~K
Please note:
Set the stitch width 2.5 before starting to
sew. To have better sewing performance,
please use the spoon pin cap (large)(r).
Carefully turn the hand wheel (20) to check
that the twin needle enters the stitch hole
without touching or even striking the stitch
plate (8) or pressure foot.
When sewing with a twin needle (j) always
advance and sew slowly to ensure quality
stitching.
When sewing with a twin needle both
threads must be of the same weight. You
h
can use one or two colours.
1. Insert a spool (m) as usual onto the spool
pin (14) and secure with a spool pin cap (r).
2. Insert the secondary spool pin (q) into the
hole provided for this purpose (21) on the
top of the sewing machine. Place the felt
cushion (h) on the secondary spool pin (q).
Next insert another spool (m) on the
secondary spool pin.
3. Insert the twin needle (j).
4. Thread both threads as usual.
Ndividual threading, the thread on the left
spool pin is to thread through the left side of
silver discs (a), and the thread on the right
spool pin is to thread through the right side
of silver discs (a).
5. Place one thread into the slot on the left
side of the needle thread guide and the
other thread into the slot on the right side of
the needle thread guide.
6. As the last step, thread one thread through
the left needle and the other through the
right needle.
Sewing basics
Stitch width Stitch length
I 3~5
Stitch width Stitch length
2.5 1~4, S1, S2
1~2
GB / IE 93